UZARAS 3D YAZICI FİLAMENT MAKİNE DOĞAL POLİMER İMALATI LAZER KESİM İTHALAT VE İHRACAT A.Ş.

I have given 20kg of filament so far and the products I have used in different machines are of good quality according to abg cctree, most of those who complain in the comments blamed the filament for their inexperience; 1.Do not leave the filament on the machine after use.If possible, keep the filament in a container and keep it with silica gel. 2.Seam marks need to come out somehow after a layer related to the slicer is finished6, you need to set it up, it will either hide the stitch mark in the print or put it in the corners. 3.I definitely advise those who live by the sea to buy a fruit dryer. You cannot believe how much moisture it absorbs. The filaments must be dried before each print. 4. The most important detail of the print is the first layer. Make the bed leveling well, clean your table continuously with alcohol, even the first layer is a little thick and press the Flow rate high, it did not happen. If you still have a problem when you realize these, you can blame the filament and uzaras, I have nothing to do with uzaras, they sell cheap and fresh filaments until now, a really, really stale Filament came out of it, except that there are minor color inconsistencies but the main problem that can be ignored is PTT cargo, people are negative This must be what leaves a reputation. He should urgently find an alternative logistic way. This does not work with PTT. No, I will understand again if the cargo is free, but we give the money to make a deal with another company, it should not be that difficult.

I have been buying filaments here for about 1-2 years and the price performance is really good, the filaments can be difficult for someone who has just started printing (which was in my early days) but they sell at 20-30% cheaper than other brands in the market and I have had little problems with the filaments so far. in general most of them could always be ignored. The only problem I have had with the company so far was that they helped me when I contacted tenth for future orders. Most of the bad reviews about the filament quality here are probably novice people. Because when there is a problem in printing, it is easier for people to blame the filament rather than dealing with mechanical parts or software problems.

I am changing my 1 star review. I had to hand over the rights to Uzaras after seeing the companies that opportunistically made a dollar increase and raised 200%. I gave one star because of customer relations, but it doesn't interest me because I had no relationship with him other than going to the website and ordering. If I didn't have 20 filaments, I would still buy them, but I don't buy them because they are stale. I can't finish these filaments in 2 years

The petroleum green filament looks fine, but there is no printed photo of the products, it is not clear what is what on the site. Photographs of each filament must have a printed sample. I was going to order again, but for this reason I gave up.

UZARAS is the company where I bought my filaments since the day I met 3D Printer. Thank you very much for its affordable price and quality products.

I purchased Glint Pearl PLA filament for my Ender 3 Pro printer. It has a light to bright and very nice color. Ender 3 is more robust than the filament that came out of its box and I have not had any odor problem in the prints I have done so far. In addition, there was no problem with sticking to the tray. It is very nice that the product is without a reel, it reduces unnecessary plastic waste and the wooden reel provides a much more pleasant appearance. After receiving the product, they immediately gave it to the cargo. Due to the intensity of the pandemic, the cargo was delayed a bit, but the incoming product was very successful. Such an excellent filament at such an affordable price is truly amazing, I plan to buy different colors in the future. - A month has passed and I've tried 6 different brands of filaments, including Uzaras. The product that I found the most successful in terms of quality compared to the price was uzaras. At first I wasn't aware of it, but later I realized that Uzaras' performance to the table is really good. He never gets up. I also tried the TPU flexible filament. Since I have a Bowden type printer, I could not achieve much success, but the filament looks very flexible and robust. I will try to convert the printer to direct drive and print again. I also tried glint sky blue and turquoise pla plus. Incredibly successful products for their prices. Also, although I have used filaments for a long time, I just noticed glint plas are much brighter than pla plus. I recommend glint colors especially for vases, models, figures etc.

The filaments are successful in adhesion and color to the table, but I cannot say the same about their durability. I could not get efficiency in mechanical or functional parts. It would be much better if installments were made with cards other than Finansbank.

I tried PLA and PetG filaments. perishable poor quality etc. in previous comments. tried, but I did not have any problems. there is no problem in winding, but if the screws are over tightened while mounting the reel, winding complaints may come of course, but the problem is that the reel screws are over tightened, nothing else. With a little logic, everything will be solved. I have never used pla in my prints before, I have always used PetG, I made my first pla experience with this brand. There were minor problems at first, but this is normal, you may not be able to print properly with your previous filament or with standard settings, it is necessary to take test prints first, which temperature / speed should you test. You should prepare profiles for printing speed and quality according to your filament, the values ​​of each brand are different. I got performance in pla and PetG at slightly higher temperatures than the standards. I can't make a comparison for pla, but if I have to speak for PetG, it is more robust and easier/faster to suppress than the brand I used before. some friends wrote that it's half price, so I couldn't catch those days :D, in summary, don't look at what is written as poor quality. I am not a brand fanatic, yesterday I was using x brand, today I am using uzaras, tomorrow I can use y brand. It is a product that meets the standards as far as I use it. In the future, I expect it to skip ABS and produce low temp PC filament and offer it at affordable prices. If the manufacturer does not break the standard, it will definitely progress. I am calling out to our producer friend from here; I am stating that I have a similar experience in a different field. Expanding the color scale will make you very tired, sir, for example, let's say you produce a PC, it is sufficient to have white-black-gray colors, more will tire you out as a stock, it can greatly extend your profit time.